Solar Panel and Accessories

NavaSolar 12.8V 100Ah 1.28kWh LiFePO4 Battery NV-LFP-12100E

NV-LFP-12100E (12.8V100Ah)

NavaSolar NV-LFP series use quality trustable LiFePO4 cells, with build-in BMS system. IP65 protection, support series and parallel use, is an ideal choice for outdoor, small energy storage, marine and other fields.

Features
Safest lithium battery technology
Lithium iron Phosphate Battery(LiFePO4)
Eco-friendly
Special protection plate, supporting parallel
Multiple safety protection
Intelligent balancing function

Mechanical Specifications

Case Material: ABS
Cell Type -Chemistry: Prismatic LiFePO4
Terminal Type: M8
IP Grade: IP65

BMS Characteristics
Recommended Charge Current: 50A
Maximum Charge Current: 100A
Maximum Continuous Discharge Current: 100A
Recommended Charge Voltage: 13.6~13.8V
Max Charge Voltage: 14.4V
Overcharge Protection Voltage: 14.8~15.0V
Charge Mode: CC/CV
Discharge Cut-off Voltage (BMS): 8.8V

Basic Performance
Nominal Voltage: 12.8V
Nominal Capacity: 100Ah
Standard Discharge Time: 100A @60min
Energy: 1.28K Wh
IR: Self Discharge: Cells Square: 100Ah
Cycle Life: 2500 times
Size: 306x169x215
Weight: 10.1

NavaSolar 5.2kW 48V Offgrid Solar Inverter 80A MPPT

Features:

Pure sine wave output
Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc).
Built-in MPPT solar charge controller
MAX PV Array Open Circuit Voltage: 450V
Can provide the power to the load without battery
Combining solar system, AC utility, and battery power source to supply continuous power
Overload, short circuit and Deep discharge protection
Cold start function
Support USB, RS485 monitoring function
WIFI remote monitoring

NavaSolar 10kW 48V Hybrid Solar Inverter 80A MPPT with Wifi Dongle

Specifications
Model: MV-MH10048
Nominal Battery System Voltage: 48VDC
Parallel Capability: No
Operation Without Battery: No

Inverter Output
Rated Power: 10 000W
Surge Power: 20 000W
Wave form: Pure Sine Wave
AC Voltage Regulation (Batt.Mode): (230VAC) 5%
Inverter Efficiency (Peak): 93%
Transfer Time: 10ms (typical)

Trina Solar 545W Mono Crystalline Solar Panel TSM-545DE19

ELECTRICAL DATA (STC)
- Model: TSM-545DE19
- Peak Power Watts-PMAX (Wp)*: 545W
- Maximum Power Voltage-VMPP (V): 31.4V
- Maximum Power Current-IMPP (A): 17.37A
- Open Circuit Voltage-VOC (V): 37.7V
- Short Circuit Current-ISC (A): 18.47A
- Module Efficiency η m (%): 20.9
- 12 year Product Workmanship Warranty
- 25 year Power Warranty
- 0.55% Annual Power Attenuation
- 2% First year degradation
- Dimensions: 2384 x 1096 x 35mm
- Weight: 28.3kg

Detail Spec:
Trina Solar 545W Mono Crystalline Solar Panel TSM-545DE19

- In stock with Supplier
- 1-5pcs Collection in our ofiice
- 5pcs or More (Pallet) - Collection at Supplier's Johannesburg Warehouse Only.
- Free Courier Does Not Apply on Solar Panel

GEYA Solar PV DC Combiner Box 1in-1out 550VDC 15A Fuse SPD 2P Breaker Pre-Wired GYPV/1-1

GEYA Solar PV Fuse Holder 1P with LED 10x38mm DC1000V GYPV-32

Model: GYPV-32
Fuse Size: 10x38mm (Not Included/ Optional)
Rated Voltage: DC1000V
Current Rating: 32A Max
Breaking Capacity: 20KA
Wire Range: 1-10mm²

Solar PV MC4 Connectors Crimping Tool & Stripper Tool Kits Set

- 1x Crimping Tool for MC4 Connectors
- 2.5mm² - 6mm² Wire
- 26-10 AWG
- 1x Wire Stripper
- 1x MC4 Connectors (Male-Female Set)
- 1x Set of MC4 Spanners
- Carry Bag

SINOTIMER Adjustable Over-Voltage Under-Voltage Protector 230V 63A SVP-916

Descriptions:

- SINOTIMER SVP series automatic over-voltage protection device is suitable for single-phase AC voltage 230V, 50/60Hz, rated working current 63A and below users or loads.When the power situation is unstable, it's protection function will be automatically activated.
- It is mainly used for the protection of over-voltage, under-voltage or over-current in the distribution line of residential household box or the protection of single-phase power equipment.
- Its main feature is overvoltage or undervoltage in the line, overcurrent condition, the product can cut off the power supply instantaneously, protect the electrical equipment from being damaged; when the line voltage returns to normal, the protector can automatically turn on the power supply normally.

Features:

1.Stable Performence:The circuit boardss of products adopt good quality electronic components with longer service life and more reliable performance.
2.Easy Installation:35mm standard guide rail installation,easy to mount.
3.Simple Operation:The automatic recovery over voltage and under voltage protective device complies with modular design standards, and its use and maintenance are very simple.
4.Signal Light:The green indicator display, when the power is normal supply. The red indicator display, when the power over voltage or under voltage.
5.Clear Read:Super clear LED display and ultra-wide viewing angle, voltage and current reading can be easily seen at any time.
6.Function:Once the voltage exceeds the limited range of products, it will automatically cut off so as to protect the safely of electrical equipment and persons. The device will re-supply, when the power returns to normal.

Specifications:

- Brand:SINOTIMER
- Name:Undervoltage/Overvoltage Protector
- Model:SVP-916
- Rated AC Voltage:230V AC 50Hz/60Hz
- Passing Max Current: 63A
- Over-voltage Protection Value Range:221V~300~OFF(Default:280V)
- Over-voltage Recovery Voltage Range:220V~299V(Default:250V)
- Over-voltage Protection Action Time:0.1s~10s(Default:0.1s)
- Under-voltage Protection Value Range:150V~219V~OFF(Default:160V)
- Under-voltage Recovery Voltage Range:151V~220V (Default:180V)
- Under-voltage Protection Action Time:0.1s~10s(Default:0.1s)
- Over-current Protection Value Range:1A~63A(Default:63A)
- Over-current Action Range:0.1~512s(Default:5.0s)
- Recovery Time:2s~120s(Default:60s)​​
- Delay Time After Power-on:2s~10s(Default:2s)
- Over-voltage Protection:Yes
- Under-voltage Protection:Yes
- Over-voltage Protection Value Adjustable:Yes
- Over-voltage Recovery Value Adjustable:Yes
- Under-voltage Protection Value Adjustable:Yes
- Under-voltage Recovery Value Adjustable:Yes
- Fault Recovery Delay Time Adjustable:Yes
- Delay Time After Power-on Adjustable:Yes
- Voltage Display(Voltage Measurement):Yes
- Current Display(Current Measurement):Yes
- Over-current Value Adjustable:Yes
- Automatic Recovery:Yes
- Installing:35mm Din Rail
- Size:58x36x65mm/2.28x1.42x2.56in

LIKET Solar PV DC Surge Protector 2P SPD 1000VDC 40KA LKTD2-PV1000

Model: LKTD2-PV1000
Poles: 2P
Un: 1000V DC
Imax: 40kA(8/20)
In: 20kA(8/20)

LIKET Solar PV Fuse Holder 1P with LED 10x38mm DC1000V with 20A Fuse 

Model: ZTPV-25X
Fuse Size: 10x38mm (20A Fuse Included)
Rated Voltage: DC1000V
Current Rating: 32A Max
Wire Range: 1-10mm²